FIDR-SR
Features
- Tmax 65 to 120°C
- 1810, 3930 or 3990 W
- IP6X (IP65)
Application
Isopad FIDR-SR drum heaters are used to provide medium flow and process temperature in hazardous environments. The special design including a self-regulating heating cable embedded in a solid metal housing ensures the maximum in safety at operating conditions. Using this design an additional temperature limiter is not necessary.
These heaters are designed for standard 200 liter drum sizes of and are fully component approved according to the latest standards of ATEX.
Drum Heater
The drum heater is made out of a twopieced metal housing to be opened and closed via hinges and fasteners standing on conductive castors. The solid design ensures stable operation even on unlevel surfaces. The metal housing carries the heating cable and evenly distributes the temperature to the drum. A mechanical thermostat regulates the operating temperature. Each drum heater includes a lid. To reduce heat loss at top it is recommended to use our insulated lid.
| SKU | P/N | Item | Std. size | Height ⁽¹⁾ | I.D. ⁽¹⁾ | O.D. ⁽¹⁾ | Voltage | Rating ⁽²⁾ | Weight |
|---|---|---|---|---|---|---|---|---|---|
| ISS.A10.001 | 1235-99930131 | FIDR-SRX/200L/230V/3930W | 200 liter | 990 mm | 650 mm | 770 mm | 230 Vac | 3930 W | 60 kg |
| ISS.A10.002 | 1235-99930121 | FIDR-SRQ/200L/230V/3990W | 200 liter | 990 mm | 650 mm | 770 mm | 230 Vac | 3990 W | 60 kg |
| ISS.A10.003 | - | FIDR-SRB/200L/230V/1810W | 200 liter | 990 mm | 650 mm | 770 mm | 230 Vac | 1810 W | 60 kg |
| ISS.A10.004 | 1235-08021000 | FIDR/200L/LID/INSULATED | 200 liter | 85 mm | 790 mm | 798 mm | - | - | 20 kg |
Other dimensions and power specifications and components are available upon request such as design with other housing materials (e.g. stainless steel) or a JBU-100-L-E junction box with signal lamp for operating status (ON/OFF).
⁽¹⁾ Tolerances according to DIN ISO 2768 c
⁽²⁾ Tolerances ±10% at 230 Vac and +10°C
Certifications/Approvals
CE, IEC
Specifications
General
- Manufacturer
- Chromalox
- Brand
- Isopad
- Unit of measurement
- Piece
Area specifications
- Area classification
- Hazardous area
- Zone
- Gas 1, 2 - Dust 21, 22
- Temperature class
- T2, T4, T6
- Ingress protection
- IP6X (IP65)
- Electrical protection class
- Class I
- Ambient temperature range
- –40 to +50°C
Certifications
- Approvals
- Component approval
- Certificate
- CE 0598 / Ex
- Marking
- Ex II 2 GD Ex de IIC T2 ... T6 Ex tD A21 IP6X T240
- Norms
- EN, IEC Standard
Standard manufacturing sizes
- Height
- 990 mm including castors
- Inner diameter
- 650 mm
- Outer diameter
- 770 mm
Heater construction
- Type
- Self-regulating heating cable
- Carrier
- Sheet steel
- Material of thermal insulation
- Glass-fiber
- Thickness
- 50 mm
- Outer protection
- Sheet steel
- Paint
- Matt black heat resistant & structured blue paint
- Fixation and closure type
- Quick-snap fastener
Connection
- Junction box (type)
- STAHL Series 8118
- Ingress protection
- IP66
- Maximum ambient temperature
- –50 to +55°C
- Maximum connecting cross section
- 4 mm²
- Terminals
- 8
- Glands
- 4 x M25
- Housing material
- Polyester glass-fiber reinforced
- Connection lead length
- 2 m
- Lead cross section
- 4 mm²
- Maximum operating temperature
- 180°C
- Connection lead insulation material
- Silicone
Temperature control
- Thermostat (type)
- ETS-05-L2-E (P)
- Sensor type
- Pt100 3-wire
- Controller range
- 0 to +199°C
- Ingress protection
- IP66
- Maximum ambient temperature
- –40 to +60°C
- Housing material
- Polyester glass-fibre reinforced
Technical data
- Frequency
- 50-60 Hz
- Maximum operating voltage
- 254 Vac (~1ph)
- Nominal operating voltage
- Depending on design
- Nominal power
- Depending on design
- Maximum operating temperature
- 65 to 120°C (depends on heating cable and T-class)