IHH-ST1A/ST1D
Features
- Tmax 100°C
- Up to 110 W/m
- IP54
Application
Isopad IHH-ST1A/ST1D is a flexible heated hose for liquid and gaseous media with a maximum operating temperature of 100°C. The standard versions have smooth PTFE inner hose constructions with stainless steel braiding for pressurized operation. The thermal insulation consists of polyester fleece and ethylene propylene diene monomer (EPDM) foam.
Mechanical protection is provided by a polyamide braid and soft EPDM endcaps. Integrated Pt100 sensors provide optimum temperature control for the medium. The evenly wrapped resistance heating cable allows an homogeneous heat distribution throughout the hose.
The standard versions can be used for a wide range of applications.
Options for customized designs
If your requirements are not met by the above specifications, we can tailor-make a heated hose to suit you.
Variations depend on design and can include:
- Other nominal sizes and inner hoses, e.g. supplied components for individual heating
- Lengths up to 120 m
- Sensor types, e.g. thermocouples Type K, Type J, etc.
- Supply voltage up to 400 V, single-phase or three-phase
- Higher power outputs
- Increased ingress protection, e.g. IP65 for outdoor applications
- Increased pressure resistance, up to 475 bar at 100°C (depending on nominal diameter)
- Other materials, e.g. for applications recommending silicone free production
- Approved components for the use in hazardous areas according to IECEx and ATEX
- Replaceable inner hoses for nonpressurized gas analysis
- Premounted plugs and special supply and messenger leads
- Controlling devices and high temperature lock-out thermostats
| SKU | P/N | Item | Tmax | Fitting | Nom. Diameter | Length | Voltage | Rating |
|---|---|---|---|---|---|---|---|---|
| ISS.A08.001 | 1235-71122020 | IHH-ST1D/ND6x2M/230V/160W | 100°C | DKR | ND6 | 2.00 m | 230 Vac | 160 W |
| ISS.A08.002 | 1235-71142030 | IHH-ST1D/ND10x3M/230V/300W | 100°C | DKR | ND10 | 3.00 m | 230 Vac | 160 W |
Resources
Datasheet
English
German
Installation manual
English/German
Certifications/Approvals
CE
Specifications
General
- Manufacturer
- Chromalox
- Brand
- Isopad
- Unit of measurement
- Piece
Area specifications
- Area classification
- Nonhazardous, ordinary area
- Ingress protection
- IP54
- Electrical protection class
- Class I
- Maximum withstand temperature (power off)
- 100°C
- Ambient temperature range
- −20 to +40°C
Standard manufacturing sizes
- Length
- Up to 19 m (in steps of 0.1 m)
- Tolerances
- According to DIN 20066
- Nominal width
- 4, 6, 8, 10, 13 mm
Heater construction
- Type
- Resistance heating cable
- Material
- Various alloys
- Material of insulation
- PTFE
- Material of outer sheath
- Copper-nickel braid
- Carrier
- Stainless steel braid
- Inner hose
- Smooth PTFE hose
- Fittings
- AGR or DKR according to ISO 228/1
- Fitting material
- Galvanized steel
- Thermal fabric fiber insulation
- 4 to 5 mm polyester-fleece
- Thermal foam insulation
- 9 to 11 mm EPDM
- Outer protection
- Polyamide braid
Lead connection
- Connection length
- 1.5 m
- Cross section
- Depending on design
- Maximum operating temperature
- 180°C
- Insulation material
- Silicone
Technical data
- Frequency
- 50-60 Hz
- Nominal operating voltage
- 120 or 230 Vac
- Nominal power output
- Depending on design
- Maximum power output
- 110 W/m
- Minimum insulation resistance
- 100 MΩ
- Maximum operating temperature
- 100°C
- Maximum operating pressure
- See datasheet
- Minimum bend radius
- See datasheet