IP-DASi
Features
- Tmax 200°C
- Approx. 35 W/dm²
- IP65
Application
Isopad IP-DASI silicone heating mats for industrial use are selected where excellent flexibility and high temperature resistance in thermal processes are required. The processed silicones have good resistance to ozone, oxygen, weathering, ageing effects, bacterial and fungal attacks. They are also highly resistant to various chemicals such as alcohol, acetylene, mineral oil, acids, glucose, and glues. Used according to the manual instructions, IP-DASI heaters do not exceed the maximum panel temperature of 200°C, so no temperature sensor or controller is necessary.
The maintain temperature depends on the local environment. If you want more precise control, you can add an optional Isopad or DigiTrace controller and temperature sensor.
Special customized heating panels are available on demand; see IP-SM for options and possibilities.
| SKU | P/N | Item | Dimensions ⁽¹⁾ | Voltage | Rating ⁽²⁾ |
|---|---|---|---|---|---|
| ISS.A06.001 | 375894-000 | IP-DASI/297x210MM/230V/220W/KE1.0M | 297 x 210 mm | 230 V | 220 W |
| ISS.A06.002 | 524736-000 | IP-DASI/420x297MM/230V/440W/KE1.0M | 420 x 297 mm | 230 V | 440 W |
| ISS.A06.003 | 188460-000 | IP-DASI/594x420MM/230V/980W/KE1.0M | 594 x 420 mm | 230 V | 980 W |
| ISS.A06.004 | 611654-000 | IP-DASI/841x594MM/230V/1960W/KE1.0M | 841 x 594 mm | 230 V | 1960 W |
Other lengths and power specifications, etc. available upon request.
⁽¹⁾ Tolerances
<400 mm ±2.5 mm
>400 mm ±4.0 mm
⁽²⁾Tolerances ±10%
Resources
Datasheet
English
German
Installation manual
English/German
Certifications/Approvals
CE
Specifications
General
- Manufacturer
- Chromalox
- Brand
- Isopad
- Unit of measurement
- Piece
Area specifications
- Area classification
- Nonhazardous, ordinary area
- Ingress protection
- IP65
- Electrical protection class
- Class II
- Maximum withstand temperature (power off)
- 200°C
- Storage temperature
- –20 to +40°C
- Minimum installation temperature
- –45°C
Standard manufacturing sizes
- Tickness
- 3.3 mm ±0.5 mm
Heater construction
- Type
- Resistance heating cable
- Material
- Various alloys
- Carrier
- Silicone mat
- Material of insulation
- Silicone
- Fixing and closure type
- Holes 4 mm diameter
Lead connection
- Connection length
- 1.0 m
- Cross section
- 2 x 0.75 mm²
- Maximum operating temperature
- 180°C
- Insulation material
- Silicone
Technical data
- Frequency
- 50-60 Hz
- Nominal operating voltage
- 230 Vac
- Minimum insulation resistance
- 100 MΩ
- Maximum operating temperature
- 200°C
- Minimum bend radius
- 15 mm
- Maximum area load
- 35 W/dm²
- Maximum compression strength
- 40 N/cm²